Eject Disc From a Xbox 360 With a Broken Eject Button That is Not
Xbox 360 Wont Read Disc. How to fix xbox disc errors Additional information on game support can be found here:
Eject Disc From a Xbox 360 With a Broken Eject Button That is Not
You'd either need to read and write the dvd key from the old drive onto the new drive, or swap the dvd rom pcb from the old drive and put it in the replacement. Web xbox 360 disc not reading repair. Or buy a replacement unit. How to fix xbox disc errors Share improve this answer follow Replacing a defective dvd drive with a replacement dvd drive does not work, since the replacement has a different dvd. Additional information on game support can be found here: Web if the xbox 360 will still not read discs after cleaning the optical drive, then your optical drive is likely faulty. Take a close look at the back side of your game disc, dvd, or cd. If a disc cleaner is not working.
The major contributing factor to a disc read error is a dirty optical lens (the one that your xbox 360 laser passes through to read the disc itself). It also won't read xbox original discs this thread is archived You can clean a dirty disc by wiping. Ever have to open your xbox and close it over and over again to get it to read? If there is dirt or dust on the laser lens, your system will eventually fail to read the game disc. Web if you decide to replace the dvd rom drive please note the 360 motherboard and dvd drive are a matched pair. To learn more, see xbox 360 usb flash drive faq. Or you can try another simpler way. And after you go into the program, choose mpeg2 as the output, then burn the video to a blank disk and insert again to xbox360. Inspect and clean your game disc, dvd, or cd. Usually, it helps the console to read the disc.
